HF 7451

"Single-Frame" front bumper "EVO" in RS4-Look for cars with or without headlight washer system & without Parktronic (PDC)

PKG

1 set

HF 7451-P

"Single-Frame" front bumper for cars with or without headlight washer system & with Parktronic (PDC)

PKG

1 set

HF 7452

recommended for HF 7451 und HF 7451-P:
Power lift for the bonnet / hood

1 piece

HF 7456-RS4

needed for HF 7451 und HF 7451-P:
"RS4" mesh for the fog lights, the OEM fog lights can be kept

OEM

1 set

HF 7262

New:additional light package for HF 7451 + HF 7451-P: 2x LED day driving lights with 5 LED, incl. cable set & holders.The "RS4" mesh has to be cut to make the lights fit!

1 set

HF 7459

needed for HF 7451-P:                                                                                                                  cable extension for the PDC sensors

1 set

HF 7455

needed for cars without headlight washer system:
covers to seal the openings in the front bumper HF 7451 & HF 7451-P, incl. glue

OEM

1 set

various front grills Typ S4 / RS4  for font bumper  "EVO"

HF 7052-S4

"Single-Frame" front grill "S4"
for HF 7451, incl. license plate holder for cars without PDC, OEM part especially prepared for HF 7451

OEM

1 piece

HF 7052-P-S4

"Single-Frame" front grill "S4"
for HF 7451-P, incl. license plate holder for cars with PDC, OEM part especially prepared for HF 7451-P

OEM

1 piece

HF 7052-RS4

"Single-Frame" front grill "RS4"  silver frame
for HF 7451, incl. license plate holder for cars without PDC, OEM part especially prepared for HF 7451

OEM

1 piece

HF 7052-P-RS4

"Single-Frame" front grill "RS4"  silver frame
for HF 7451-P, incl. license plate holder for cars with PDC, OEM part especially prepared for HF 7451-P

OEM

1 piece

HF 7052-RS4 B

"Single-Frame" front grill "RS4"  black frame
for HF 7451, incl. license plate holder for cars without PDC, OEM part especially prepared for HF 7451

OEM

1 piece

HF 7052-P-RS4 B

"Single-Frame" front grill "RS4"  black frame
for HF 7451-P, incl. license plate holder for cars with PDC, OEM part especially prepared for HF 7451-P

OEM

1 piece

HF 7461

front bumper "EVO-Light" for cars with or without headlight washer system & without Parktronic (PDC)

PKG

1 piece

HF 7461-P

front bumper "EVO-Light" for cars with or without headlight washer system & with Parktronic (PDC)

PKG

1 piece

HF 7455

needed for cars without headlight washer system:
covers to seal the openings in the front bumper HF 7451 & HF 7451-P, incl. glue

OEM

1 set

HF 7456-RS4

needed for HF 7451 und HF 7451-P:
"RS4" mesh for the fog lights, the OEM fog lights can be kept

OEM

1 set

HF 7262

New:  Additional light package for HF 7651 + HF 7461-P:                                                        2x LED day driving lights with 5 LED, incl. cable set & holders.                      The "RS4" mesh has to be cut to make the lights fit!

1 set

HF 7362-S4

Recommended for use along with HF 7461 & HF 7461-P:                       "S4" front grill für Audi A4 B6 8E

OEM

1 piece

HF 7363-RS

Recommended for use along with HF 7461 & HF 7461-P:                        "EVO-mesh" front grill für Audi A4 B6 8E

OEM

1 piece

HF 7458

side skirts RS4-Look

RIM

1 set

HF 7457

rear spoiler, only for Limousine / Sedan!  Rear spoiler in 3 parts.

PKG

1 set

HF 7453

rear apron, only for Limousine / Sedan, not for S4!  Recommended for use along with sport tailpipes or sports muffler

PKG

1 piece

HF 7453-Avant

rear apron, only for Station wagon / Avant, not for S4!  Recommended for use along with sport tailpipes or sports muffler

PKG

1 piece

HF 7959-A4

bonnet / hood scoop "Power Dome", will be glued on the bonnet.

PU

1 piece

HF 7466

"EVO" sport tailpipes kit,
2 oval tailpipes with diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised.   Not for S4!
Only for A4 with 2 serial single tailpipes, one left side and one right side!   Recomended for use along with rear apron HF 7253

E

1 set =
2 piece

HF 7467

"EVO" sport tailpipes kit,
2 oval tailpipes with diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised.
Only for A4 with 1 serial single tailpipes left side! With special fixing bracket for the other side, where a Dummy with be fixed. Right side oval tail pipe is only a Dummy (no smoke coming out).
Recomended for use along with rear apron HF 7253

E

1 set
=
2 piece

HF 7468

"EVO" sport tailpipes kit,
2 oval tailpipes with diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised.
Only for A4 with 1 serial double tailpipes left side! With special fixing bracket for the other side, where a Dummy with be fixed. Right side oval tail pipe is only a Dummy (no smoke coming out).
Recomended for use along with rear apron HF 7253

E

1 set
=
2 piece

HF 9710204

Duplex sports muffler with one oval tailpipe per side, oval tailpipes with diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B6 8E with 2WD & the following engine versions: 1.6, 2.0, 1.9 TDI, 2.0 TDI & 1.8 T (gasoline engine with 75, 96, 110, 120, 132 & 140 kW, Diesel engine with 74, 85, 89, 93, 96, 100 & 103 kW) The muffler can be combined with the Hofele-Design rear apron or the serial rear apron but the serial rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities

E

1 piece

HF 97102014

Duplex sports muffler with one oval tailpipe per side, oval tailpipes with diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B6 8E with 2WD & the following engine versions: 2.4, 2.6, 2.7 T, 3.0, 2.5 TDI, 2.7 TDI & 3.0 TDI (Gasoline engine with 121, 125, 128, 142, 162, 171 & 188 kW, Diesel engine with 110, 114, 120, 132, 140, 150 & 171 kW)
The muffler can be combined with the Hofele-Design rear apron or the serial rear apron but the serial rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities

E

1 piece

HF 9710224

Duplex sports muffler with one oval tailpipe per side, oval tailpipes with diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B6 8E with 4WD & the following engine versions: 1.8 T, 2.0 T, 1.9 TDI, (gasoline engine with 110, 120, 140, 147 & 162 kW, Diesel engine with 96 kW) The muffler can be combined with the Hofele-Design rear apron or the serial rear apron but the serial rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities

E

1 piece

HF 97102214

Duplex sports muffler with one oval tailpipe per side, oval tailpipes with diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B6 8E with 4WD & the following engine versions: 3.0, 3.2, 2.5 TDI, 3.0 TDI (gasoline engine with 162 & 188 kW, Diesel engine with 132, 150 & 171 kW) The muffler can be combined with the Hofele-Design rear apron or the serial rear apron but the serial rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities

E

1 piece

HF 9205112

"Largo 20" designer wheel, colour: Brilliance Silver, size: 9J x 20", PCD: 5x112, CH: 57,1, offset 40, TÜV approved for the Audi A4 B6 8E with the tire size 235/30 ZR 20 88Y or 245/30 ZR 20 90Y. Wheel spacers have to be used to mount the wheels!   

alloy

1 piece

Largo 20 wheel + tire
Largo 20 with quality tires completely mounted & balanced.

HF 7472

wheel spacers for LARGO-20 wheels with tires 235/30 ZR 20  or 245/30 ZR 20 at front & rear axle
front axle: 10 mm
rear axle:  10 mm
incl. longer wheel bolts

alloy

1 set
=
4 piece

HF 7473

wheel spacers for LARGO-20 wheels with tires 235/30 ZR 20 at front & rear axle
front axle:  10 mm
rear axle:   25 mm
incl. longer wheel bolts

alloy

1 set
=
4 piece

"SPYDER" Aluminum Wheel  - Dynamic & Racelook
                               Design similar RS4-Look
1-part wheel with 8-double spokes and screw circle around.
Colour: black polished, sizes from 8J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List"

alloy

1 piece

"PRADO" Aluminum wheel  - Dynamic & Elegance
      choice with or without INOX stainless steel lip
1-part wheel with 5-double spokes and screw circle around.
Colours:  silver, black, white, black polished,
sizes from 8,5J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List"

alloy

1 piece

HF 29369-1

sport springs for front & rear axle, lowering of approx. 35mm for A4 B6 8E with 2WD up to 1.050kg front axle weight

ST

1 set
=
4 piece

HF 29369-2

sport springs for front & rear axle, lowering of approx. 35mm for A4 B6 8E with 2WD from 1.051kg front axle weight, incl. A4 DTM Edition 2WD, Typ QB6, 2,0 l Turbo

ST

1 set
=
4 piece

HF 29368-1

sport springs for front & rear axle, lowering of approx. 45mm for A4 B6 8E with 4WD up to 1.140kg front axle weight, incl. A4 DTM Edition 4WD, Typ QB6, 2,0 l Turbo Quattro

ST

1 set
=
4 piece

HF 29368-2

sport springs for front & rear axle, lowering of approx. 45mm for A4 B6 8E with 4WD from 1.141kg front axle weight

ST

1 set
=
4 piece

HF 29257-1

sport springs for front & rear axle, lowering of approx. 25 - 30mm for S4 B6 8E

ST

1 set
=
4 piece

HF 29358-1

Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-Racing supplier for Hofele-Design
for A4 B6 8E with 2WD up to 1050kg front axle weight.
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle

1 set          =
4 piece

HF 29358-2

Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-Racing supplier for Hofele-Design
for A4 B6 8E with 2WD from 1051kg front axle weight.
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle

1 set             =
4 piece

HF 29363-1

Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-Racing supplier for Hofele-Design
for A4 B6 8E with 4WD up to 1050kg front axle weight.
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle

1 set            =
4 piece

HF 29363-2

Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-Racing supplier for Hofele-Design
for A4 B6 8E with 4WD from 1051kg front axle weight.
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle

1 set              =
4 piece

HF 29250-1

Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-Racing supplier for Hofele-Design            
for S4 B6 8E V8 with 4WD.         
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle

1 set                =
4 piece

HF 33358-1

Anti-Roll-Bars "Hofele Anti-Roll" - produced by DTM-Racing-supplier for Hofele-Design
for A4 B6 8E with 2WD & 4WD
front axle d = 32mm, twofold adjustable,
rear axle d = 20mm, twofold adjustable

1 set

HF 33250-1

Anti-Roll-Bars "Hofele Anti-Roll" - produced by DTM-Racing-supplier for Hofele-Design
for S4 B6 8E with 4WD + A4 B6 8E 3,0 L Quattro + TDI Quattro
front axle d = 32mm, twofold adjustable,
rear axle d = 20mm, twofold adjustable

1 set

HF 7476

wheel spacers for original wheels
front axle: total 25mm, each space 12,5 mm
rear axle:  total 25mm, each space 12,5 mm
incl. longer wheel bolts

alloy

1 set
=
4 piece