article number |
declaration |
mat. |
unit |
AUDI A3 8P (05/2003 - 05/2005) before facelift |
| Body kit parts
& accessories |
| HF
7051-S3 |
"Single-Frame"
front bumper "S3-Look"
for cars with or without headlight washer system.
Additionally needed are the articles HF 7055, HF 7052-S3 & HF 7058-S3 |
PKG |
1 piece |
| HF 7055 |
Needed
for cars without headlight washer system:
covers for the headlight washer openings in HF 7051-S3 |
OEM |
1 set |
| HF 7058-S3 |
Needed
for HF 7051-S3:
"S3" mesh for the fog lights. The OEM fog lights have to be taken from the original bumper! |
OEM |
1 set |
| HF 7052-S3 |
Needed
for HF 7051-S3:
"Single-Frame" front grill
"S3" incl. license plate
holder |
OEM |
1 piece |
| HF 7053 |
Rear
apron "Diffusor" for 4-tube-sport muffler
specially made for Hofele-sport muffler HF 6060 + HF 6062
Only A3 3-door car, not for Sportback! |
PKG |
1 piece |
| HF 7054 |
Rear
apron "Diffusor" for original tailpipes, left
up to double tail pipe version left.
Only A3 3-door car, not for Sportback! |
PKG |
1 piece |
| HF 7057 |
Rear
roof spoiler, A3 3-door cars
for all A3 3-door cars, starting
5.2003 until today. - Not for A3 Sportback - |
ABS |
1 piece |
| exhaust system |
| HF 6060 |
4-tube-Sport-muffler
in stainless steel, with each side 2 tail pipes, left and
right, tailpipes design Round, different diameter of the tubes 1 x 84 + 1x 90
mm, 1 tube more inside and 1 more outside, round tube edge, Duplex stainless
steel rustfree. Motor 1.4, 1.6, 1.8, 1.9TDI, 2.0TDI,
(gasoline 55, 66, 75, 85, 110 KW, Diesel 55, 66, 77, 100, 103 KW)
only for Hofele-rear apron HF
7053,
TÜV-homologation. Only for
A3 3-door cars, not for Sportback! |
E |
1 piece |
| HF 6062 |
4-tube-Sport-muffler in stainless steel, with each side 2 tail pipes, left and right,
tailpipes design Round, different diameter of the tubes 1 x 84 + 1x 90 mm, 1
tube more inside and 1 more outside, round tube edge, Duplex stainless steel
rustfree. 76 mm- tube system ( 3 Zoll! ), Motor 2.0
FSI Turbo,
only for Hofele-rear apron HF
7053,
TÜV-homologation. Only for
A3 3-door cars, not for Sportback! |
E |
1 piece |
| HF 9710304 |
4-tube
stainless steel sports muffler with two round tailpipes per side. The two tailpipes have a diameter of 1 x 84 + 1x 90 mm, are
shifted and have raised edges. The complete muffler is made of stainless
steel.
The muffler is suitable for the
following engine versions: 1.6, 1.8, 1.9 TDI, 2.0,
2.0 TDI, (gasoline engine with 75, 85, 92 & 110 KW, diesel engine with
74, 77, 100 & 103 KW)
The muffler can be combined with the serial rear bumper but it has to be cut
to make the tailpipes fit! |
E |
1 piece |
| HF 9710314 |
4-tube
stainless steel sports muffler with two round tailpipes per side. The two tailpipes have a diameter of 1 x 84 + 1x 90 mm, are
shifted and have raised edges. The complete muffler is made of stainless
steel.
The muffler is suitable for the following engine versions:
76 mm-system (3 inch) 2.0 FSI Turbo (gasoline engine with 147 KW), The muffler can be combined
with the serial rear bumper but it has to be cut to make the tailpipes fit! |
E |
1 piece |
| wheels & chassis |
| |
"SPYDER"
Aluminum Wheel - Dynamic &
Racelook
Design
similar RS4-Look
1-part wheel with 8-double spokes and screw circle
around.
Colour: black polished, sizes from 8J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List" |
alloy |
1 piece |
| |
"PRADO"
Aluminum wheel - Dynamic &
Elegance
choice with or without INOX
stainless steel lip
1-part wheel with 5-double spokes and screw circle
around.
Colours: silver, black, white, black
polished,
sizes from 8,5J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List" |
alloy |
1 piece |
| HF 7472 |
wheel
spacers for front & rear axle
front axle: 10mm, each spacer 5 mm
thickness
rear axle: 10mm, each spacer
5 mm thickness
+ longer wheel bolts |
alloy |
1 set |
| HF 7476 |
wheel
spacers for front & rear axle
front axle: 25mm, each spacer 12,5 mm thickness
rear axle: 25mm, each spacer 12,5 mm
thickness
+ longer wheel bolts |
alloy |
1 set |
| HF 29261-1 |
sport
springs for front & rear axle, lowering of approx. 35mm
for A3 8P with 2WD up to 1.020kg front axle weight |
ST |
1 set |
| HF 29261-2 |
sport
springs for front & rear axle, lowering of approx. 35mm
for A3 8P with 2WD from 1.021kg front axle weight |
ST |
1 set |
| HF 29260-1 |
sport
springs for front & rear axle, lowering of approx. 45 - 50mm
for A3 8P with 2WD |
ST |
1 set |
| HF 29227-1 |
sport
springs for front & rear axle, lowering of approx. 35mm
for A3 8P with 4WD / Quattro |
ST |
1 set |
| HF 29258-1 |
Height-adjustable
coil-overs "Hofele-Mono-Tube" - produced by
DTM-Racing supplier for Hofele-Design
for A3 8P with 2WD with front strut
clamp d=55mm
Lowering of 40 - 60mm at front
& 40 - 60mm at rear axle |
|
1 set |
| HF 29258-2 |
Height-adjustable
coil-overs "Hofele-Mono-Tube" - produced by
DTM-Racing supplier for Hofele-Design
for A3 8P with 2WD with front strut
clamp d=50mm
Lowering of 40 - 60mm at front
& 40 - 60mm at rear axle |
|
1 set |
| HF 29225-1 |
Height-adjustable
coil-overs "Hofele-Mono-Tube" - produced by
DTM-Racing supplier for Hofele-Design
for A3 8P with 2WD with front strut
clamp d=55mm
Lowering of 40 - 80mm at front
& 40 - 70mm at rear axle |
|
1 set |
| HF 29225-2 |
Height-adjustable
coil-overs "Hofele-Mono-Tube" - produced by
DTM-Racing supplier for Hofele-Design
for A3 8P with 2WD with front strut
clamp d=50mm
Lowering of 40 - 80mm at front
& 40 - 70mm at rear axle |
|
1 set |
| HF 29220-1 |
Height-adjustable
coil-overs "Hofele-Mono-Tube" - produced by
DTM-Racing supplier for Hofele-Design
for A3 8P with 4WD / Quattro with
front strut clamp d=55mm
Lowering of 40 -
70mm at front & 40 - 60mm at rear axle |
|
1 set |
| HF 29431-1 |
Height-adjustable
coil-overs "Hofele-Mono-Tube" Sport Edition produced
by DTM-Racing supplier for Hofele-Design
for A3 4WD / Quattro, incl. 3,2l
& S3 Quattro with stabilizer-holder at the shock-absorber
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle |
|
1 set |
| HF 29431-2 |
Height-adjustable
coil-overs "Hofele-Mono-Tube" Comfort Edition produced
by DTM-Racing supplier for Hofele-Design
for A3 4WD / Quattro, incl. 3,2l
& S3 Quattro with stabilizer-holder at the shock-absorber
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle |
|
1 set |
| HF 33258-1 |
Anti-Roll-Bars
"Hofele Anti-Roll" - produced by
DTM-Racing-supplier for Hofele-Design
for A3 8P with 2WD and Xenon lights
front axle d = 26mm, twofold adjustable, rear axle d = 22mm, twofold
adjustable |
|
1 set |
| HF 33258-3 |
Anti-Roll-Bars
"Hofele Anti-Roll" - produced by
DTM-Racing-supplier for Hofele-Design
for A3 8P with 2WD and without Xenon lights
front axle d = 26mm, twofold adjustable, rear axle d = 22mm, twofold
adjustable |
|
1 set |
| HF 33258-2 |
Anti-Roll-Bars
"Hofele Anti-Roll" - produced by
DTM-Racing-supplier for Hofele-Design
for A3 8P with 2WD
front axle d = 28mm, twofold adjustable, rear axle d = 24mm, twofold
adjustable |
|
1 set |
| HF 33220-1 |
Anti-Roll-Bars
"Hofele Anti-Roll" - produced by
DTM-Racing-supplier for Hofele-Design
for A3 8P with 4WD
front axle d = 24mm, twofold adjustable, rear axle d = 26mm, twofold
adjustable |
|
1 set |
|
|
|
|
