The front bumper fits all Audi A3 8P pre-facelift models and is made for cars with headlight washer system, which has to be taken from the OEM bumper. If the car is not equipped with a headlight washer system, the caps to seal the openings in the bumper have to be ordered additionally.
The bumper is being mounted to the original points of attachment, no modifications are needed.
Besides the bumper you also need the “S3” front grill and the “S3” mesh for the fog lights, these parts have to be ordered separately.

The rear apron can be mounted on all A3 8P pre-facelift models and is available with two cut out sections for the Hofele 4-tube sports muffler and also with just one cut out section on the left side for the serial tailpipes. The rear apron gets attached to the serial rear bumper, no modifications are needed.

The Hofele stainless steel 4-tube sports muffler replaces the serial muffler and gives your car a sportive sound. The two tailpipes per side are round and have a different diameter of
1x 84 + 1x 90mm, are shifted and edge raised.
The muffler is available for the engine versions 1.6, 1.8, 1.9TDI, 2.0, 2.0TDI, (Gasoline 75, 85, 92, 110 KW, Diesel 74, 77, 100, 103 KW) and 2.0 FSI Turbo (Gasoline 147 KW). The muffler can also be used in combination with the serial rear apron but this has to be cut then to make space for the tailpipes.

The rear roof spoiler gets attached to the serial part and gives your car a more sportive look.