"Cayster GT 670"

The new Wide Body Kit "Cayster GT 670"

For Porsche Cayenne II type 958
Exterieur:
Interieur:
Exterieur:
Interieur:

Better look
We developed for all versions of the current Porsche Cayenne a product range,
which enhances the exclusivity of this car.

With its new 12-piece body kit Hofele-Design turns the Cayenne II into the "Cayster GT 670".
With this new body kit the Cayenne gets the occurrence of a real "automotive star"!

The impressive design lines of the Cayenne design are kept and are dynamically sharpened through the emotional wheel arch extensions of the Hofele-Design body kit. The aero dynamic front end attachment elements with openings for the original fog lamps guide the air flow CW optimised to the sides and over the wheel arch extensions. As addition for the wheel arch extensions developed was the Hofele-Design rear apron diffuser.

Another strong design element are the 4-tube stainless steel tailpipes which are available as "interlaced double oval" or "double round" version. These tailpipes simply replace the original tailpipes and are bolted onto the serial Cayenne mufflers. The interaction of these 4-tube tailpipes with the wider diffuser rear apron makes the rear of the Cayenne look very powerful. As alternative the Hofele-Design rear apron can be combined with the original Cayenne tailpipes.

The original trailer coupling / tow hitch can be used along the body kit without any problems.
Most parts of the body kit are simply glued onto the car without any changes and can be used for all Cayenne models, incl. the Turbo version. The wheel arch extensions widen the car 25mm per side.

Optionally available are carbon mesh inserts for the original Turbo front bumper, made of real carbon.
Sportive dominance is achieved by the new ‚Cayster' sports bonnet / hood with middle Power-Dome and two big air intakes. A nice optical contrast are the two carbon inserts for the air intakes, made of real carbon. The sports bonnet / hood is made of heat resistant CB composite material and consists of two dishes.



More Elegance
In the interior Hofele-Design indulges with their own "Bi-Colour" leather design "Star-Light".
The bi-colour "StarLight" leather interior has the Hofele-Design style with nested stripes, inserted leather crest, quilted elements and offset decorative stitching. These high-quality seat covers can be put on the original Cayenne seat frames by a professional upholsterer.

As addition to the "StarLight" seat covers the door panels and arm rest can be
covered with leather as well.

For the interior of the Cayenne Hofele-Design offers a set of carbon panels for the middle console, dashboard, doors, etc. The parts are made upon the customers request and are available in different colours.

The parts are made of a layer of real carbon with multiple layers of clear coat.



More dynamic
The Hofele-Design product range features a variety of elegant designer wheels in the sizes between 20" and 22".

The electric lowering module lowers and lifts the Cayenne with air suspension speed-related. While standing and up to a speed of 80 km/h the car is lowered up to 40mm. On speeds over 80 km/h the module is deactivated to retain the serial height to give the
chassis its full comfort and reserves on high speeds.

But what presses the passengers into the elegant seats in the sportive interior?

The engine tuning for the Cayenne 3.0 TDI V6 or the Cayenne S Hybrid by Hofele-Design!
Hofele-Design increases the power of the 3.0 TDI V6 from 245 PS to 315 PS and the torque from 550 Nm to 650 Nm. For the Cayenne S Hybrid Hofele-Design increases the power from 380 PS to 481 PS and the torque from 580 Nm to 737 Nm.

As usual all parts are being mounted to the original points of attachment. This is easy-going, fast and requires no modifications to the car at all.

The complete kit is available and ready for sale.



Order
ask for offer
Tuning & Styling for Porsche Cayenne II type 958
art.-no.
declaration
material
unit
 
HF 9651
Wide body kit "CAYSTER II GT 670":
Version for non-Turbo models without distance radar (ACC). complete front bumper incl. TURBO front grill and mesh inserts for the sides, a set of fog lamps, wheel arch extension kit for the front and rear axle and a 3-piece rear apron in diffuser design for the serial rear bumper.

-the kit consists of 10 pieces- Most of the kit is simply glued onto the car, the front bumper is mounted to the original points of attachment. The extension is 25mm per side.
Suitable for cars with parking sensors.
The kit can be used on all Cayenne non-Turbo models.

Developped for the combination with the oval double tailpipes HF 9655 but the kit can also be combined with the serial tailpipes. Suitable for cars with trailer coupling / tow bar.

Additionally needed are the TURBO indicators / DRL HF 9653.

We recommend the use of wheel spacers, please check the "Chassis" listing below.
HPC
1 set
HF 9651-ACC
Wide body kit "CAYSTER II GT 670":
Version for non-Turbo models with distance radar (ACC). complete front bumper incl. TURBO front grill and mesh inserts for the sides, a set of fog lamps, wheel arch extension kit for the front and rear axle and a 3-piece rear apron in diffuser design for the serial rear bumper.

-the kit consists of 10 pieces- Most of the kit is simply glued onto the car, the front bumper is mounted to the original points of attachment. The extension is 25mm per side.
Suitable for cars with parking sensors.
The kit can be used on all Cayenne non-Turbo models.

Developped for the combination with the oval double tailpipes HF 9655 but the kit can also be combined with the serial tailpipes. Suitable for cars with trailer coupling / tow bar.

Additionally needed are the TURBO indicators / DRL HF 9653.

We recommend the use of wheel spacers, please check the "Chassis" listing below.
HPC
1 set
HF 9651-T
Wide body kit "CAYSTER II GT 670":
Version for Turbo models with or withouz distance radar (ACC). complete front bumper incl. TURBO front grill and mesh inserts for the sides, a set of fog lamps, wheel arch extension kit for the front and rear axle and a 3-piece rear apron in diffuser design for the serial rear bumper.

-the kit consists of 10 pieces- Most of the kit is simply glued onto the car, the front bumper is mounted to the original points of attachment. The extension is 25mm per side.
Suitable for cars with parking sensors.
The kit can be used on all Cayenne Turbo models.

Developped for the combination with the oval double tailpipes HF 9655 but the kit can also be combined with the serial tailpipes. Suitable for cars with trailer coupling / tow bar.

The TURBO indicators / DRL and the front grill have to be taken from the serial bumper.

We recommend the use of wheel spacers, please check the "Chassis" listing below.
HPC
1 set
HF 9653
Light package for HF 9651 & HF 9651-ACC "Turbo-indicators":
with integrated
- LED-daytime running lights
- indicators
set with two pieces, for the
left and right side.
OEM
1 set
HF 9651-TÜV
TUEV-approval papers for the Wide Body Kit "Cayster II GT 670":
Not needed for Export.
 
1 piece
HF 9655
oval double tailpipes:
made of stainless steel, chromed. Tailpipe design "double oval interlaced", diameter 215 x 80mm. The tailpipes have to be clamped and welded onto the serial muffler. Set for the left and right side.
E
1 set
HF 9654
Sports bonnet / hood "Cayster II":
Bonnet / hood with two Power-Domes and two big air intakes. Incl. two removable carbon inserts for the air intakes, made of real carbon. The bonnet / hood has to be painted inside and outside. Same weight as the original alloy bonnet / hood. Only for export or single TUEV at Hofele-Design.
HPC + CB
1 piece
HF 9657
Rear trunk spoiler:
the edge can be painted in black, the rest in the cars colour.
HPC
1 piece
HF 7959-P
Bonnet / hood scoop "Power Dome":
for the serial Cayenne bonnet / hood. Incl. special glue. Cannot be combined with the sports bonnet / hood HF 9664.
PU
1 piece

Carbon parts:

HF 9657-CB
Rear trunk spoiler carbon version:
the edge is covered with real carbon, the rest has to be painted in the cars colour.
HPC + CB
1 piece
HF 9664
Carbon mirror housings for Cayenne:
the serial mirror glas and electrics have to be inserted. Two pieces, one for the left and one for the right side. Made of a cover of real carbon and multiple layers of clear coat.
CB
1 set
HF 9665
Carbon interior parts:
set for the dash board, middle console, doors, etc. Different carbon colours available. Made of real carbon and multiple layers of clear coat.
CB
1 set