| article
number |
declaration |
mat. |
unit |
for Porsche 911 (type 996)
- from 1997 -model year 1998- up to model year 2001
for&xnbsp; 911 3,4 ltr., 221 KW (300 PS), Carrera Coupe + Targa + Cabrio,
-not Turbo- |
| aerodynamic body kit & accessory |
| HF 9451 |
"996 GT" complete front bumper,
in the actual "Design Look"
for cars without ParkAssistent (PDC / Parktronic).
Front bumper with lamellas in the outer air intakes and honeycomb mesh
insert in the middle air intake.
The bumper replaces the original part without any need for modifications to
the car and is fixed to the serial points of attachment.
Additionally available are LED daytime running lights which can be inserted
into the out air intakes. These LED lights have to ordered separately. |
PKG |
1 piece |
| HF 5077-C |
universal
LED daytime running lights with 5 LEDs
incl. wiring
harness, control unit, holders and installation guide. In order to insert the
LED lights the mesh insert has to be cut. Set with two pieces.
Approved by the ECE & SAE, strong alloy housing. Approved as daytime
running lights and position lamps.
Version with clear glass and chromated reflector. |
|
1 set |
| HF 5077-B |
universal
LED daytime running lights with 5 LEDs
incl. wiring
harness, control unit, holders and installation guide. In order to insert the
LED lights the mesh insert has to be cut. Set with two pieces.
Approved by the ECE & SAE, strong alloy housing. Approved as daytime
running lights and position lamps.
Version with dark tinted glass. |
|
1 set |
| HF 9552 |
"996" side skirts, set with
two pieces, one for the left and one for the right side of the car.
The side skirts are glued on, the special glue is part of the delivery.
For
911-versions Coupé, Targa + Cabrio,
not for GT2, Turbo, 4S (with wider rear). |
PKG |
1 set |
| HF 9553 |
"996-Turbo-Look"
complete rear bumper
- with air vents on the
sides.
The bumper replaces the original part without any need for modifications to
the car and is fixed to the serial points of attachment.
We recommend the use of the big oval tailpipes HF 7466 along with this
bumper.
Forr Porsche 911 / 996 built from 1997-2006 for versions Coupé, Targa
+ Cabrio, not
for GT2, Turbo, 4S (with wider rear). |
PKG |
1 piece |
| HF 9558-ST |
996
Coupe rear roof spoiler
only for Coupé, -not for Targa or Cabrio-
sportive look, simple fitting |
PKG |
1 piece |
| HF 9557-ST |
big
996 rear spoiler with air intakes at the sides
placed
onto the original bonnet / hood.
The serial foldable spoiler has to be deactivated.
The bigger surface results in a better downforce.
The part needs to be painted. |
PKG |
1 piece |
| additional bodyparts |
| HF 9463 |
"Facelift" headlight masks,
for cars without headlight washer system
set with two pieces, one for the left and one for the right
side.
The parts are glued onto the car, the special glue is part of the delivery.
For models 1998 up to 2001. |
PKG |
1 set |
| HF 9465 |
"ST-series" headlight masks,
for cars without headlight washer system
set with two pieces, one for the left and one for the right
side.
The parts are glued onto the car, the special glue is part of the delivery.
For models 1998 up to 2001. |
PKG |
1 set |
| HF 9465-SRA |
"ST-series" headlight masks,
for cars with headlight washer system
set with two pieces, one for the left and one for the right
side.
The parts are glued onto the car, the special glue is part of the delivery.
For models 1998 up to 2001. |
PKG |
1 set |
| HF 9559 |
Modern
"LED- taillights", set with two pieces.
The actual taillight look for the Porsche 996-generation 2WD
(not for 4S, Turbo, GT3 -with wider rear-)
Attention: not TÜV
approved, only for Export! |
|
1 set |
| interior design |
| |
Interior design "Bi-Colour"-leather
for the seats: two front seats
The middle area of the seats are stiched in the classic diamond pattern
(similar to Bentley).
Different colours and combinations are possible. |
1 set |
| |
covering of the middle areas of the doors with leather
stiched in the classic diamond pattern (similar to
Bentley).
Different colours and combinations are possible.
Set for two doors. |
1 set |
| |
The customer can bring or send the parts to Hofele-Design and we
make the conversion. Afterwards we send the parts back to the customer.
Or it could be done directly in our Hofele body work shop in Donzdorf,
Germany. |
|
