Sport-Edition "SR8-Line" for Audi A8 D4 (4H)
Exterieur:
Interieur:



Sportive suit for the Audi A8 D4 "SR 8"


The new Audi A8 "SR 8" by Hofele Design is elegant and sportive at the same time.
Perfectly balanced aerodynamics combined with exclusive and individual design
convert the well-behaved limousine into a very special sports car dressed with a dynamic,
sportive suit.

The new body kit shows how an original "RS8" made by Audi might look like.



Sportive Design
With this body kit Hofele-Design transforms the Audi A8 D4 into the sportive dynamic "SR 8."
The new body kit consists of a complete front bumper with original "RS 5" mesh inserts, a rear apron with diffuser, a 4-tube sports muffler and a rear trunk spoiler. The front bumper has big air intakes which supply the intercoolers with more air. The newly shaped rear apron is the frame for the removable diffuser. This diffuser surrounds the four tailpipes of the new sports muffler. The sports muffler has an additional airflow and has a sportive sound, especially on cars with Gasoline engine. The new rear trunk spoiler adds more down force on high speeds. The diffuser can either be painted in the cars colour or in a contrasting colour like silver or black or can be ordered with a layer of real carbon.




Exclusive highlight
As exclusive highlight, besides the carbon rear diffuser, Hofele-Design also offers carbon mirror housings to spotlight the exclusive and sportive side of this luxury limousine.




Luxury interior
For the inside of the car Hofele-Design offers a bi-colour leather interior. The two-coloured seats have a quilted stripe made of soft nappa leather which crosses the seats in the middle.
This wonderful masterpiece is available with special stitching and as a combination of different premium materials like smooth leather, rough leather or Alcantara (ecsaine / ultrasuede).
Also available are leather-covered door panels and a steering wheel.
more informations




Dynamic appearance
Part of the Hofele program for the Audi A8 D4
is a variety of alloy wheels in the sizes from 9J x 20" up to 10J x 22".

The electronic speed-related lowering module ETS lowers the Audi A8 with air suspension
up to 40mm. The system is only active on speeds under 70 km/h, on speeds over 70 km/h
the system is deactivated to give the chassis its full comfort and security.

Indulge yourself a bit more driving pleasure with the engine tuning by Hofele-Design. The engine software optimisation reveilles the unused reserves of the strong A8 engines. The 4.2 V8 FSI Gasoline engine is tuned from 372 PS to 390 PS and the 4.2 TDI CR is tuned from 350 PS to 390 PS and sensational 900 NM.

That is some increase of force!

...something special from each different angle!


Exterieur:
>test report
of the Audi "SR 8" from the magazine "AutoBild Sportscars"



>test report
of the Audi "SR 8" from the magazine "gute Fahrt"



order

ask for offer




Tuning and Styling for Audi A8 D4 4H

Body Kit "SR8-Line"
art.-no. declaration material unit  
HF 8751
Front bumper "SR8"
for cars with or without headlight washer system and without parking sensors (PDC / Parktronic) Into this front bumper the serial front grill of the Audi A8 D4 4H can be inserted. Additionally needed are the lamella mesh inserts HF 8752.
HPC
1 piece
HF 8751-P
Front bumper "SR8"
for cars with or without headlight washer system and with parking sensors (PDC / Parktronic) Into this front bumper the serial front grill of the Audi A8 D4 4H can be inserted. Additionally needed are the lamella mesh inserts HF 8752.
HPC
1 piece
HF 8751-ACC
Front bumper "SR8"
for cars with or without headlight washer system and with parking sensors (PDC / Parktronic) with distance radar (ACC) and / or night assistant. Into this front bumper the serial front grill of the Audi A8 D4 4H can be inserted. Additionally needed are the lamella mesh inserts HF 8752-ACC.
HPC
1 piece
HF 8753
Rear apron with openings for the double tailpipes
replaces the lower part of the serial rear bumper, with one big opening on the left and right side for the oval double tailpipes HF 8758 or the sports muffler HF 8760. The kit consists of two pieces, the lower diffuser can be removed. This diffuser is also available as carbon version, see the listing
"Carbon parts" below.
HPC
1 set
HF 8754
Side sills
for the left and right side. The sills are glued onto the car underneath the doors. Nice look and less dirt on the doors.
PKG
1 set
HF 8757
Rear spoiler
for the trunk / boot. The spoiler is also available as carbon version, see the listing "Carbon parts" below.
HPC
1 piece

Accessory parts & front grills for the front bumpers HF8751, HF 8751-P und HF 8751-ACC:

HF 8752
"RS" lamella mesh inserts
needed for the Hofele-Design front bumpers HF 8751 and HF 8751-P. Set for the left and right side.
OEM
1 set
HF 8752-ACC
"RS" lamella mesh inserts
needed for the Hofele-Design front bumper HF 8751-ACC. Set for the left and right side.
OEM + HPC
1 set
HF 8756-W12
Front grill "W12" model 2012:
for the Hofele-Design front bumpers HF 8751, HF 8751-P and HF 8751-ACC.
OEM
1 piece
HF 8756-S8
Front grill "S8" model 2012:
for the Hofele-Design front bumpers HF 8751, HF 8751-P and HF 8751-ACC.
OEM
1 piece
HF 8750-TÜV
TUEV approval papers for the front bumpers:
needed to get the car through the TUEV inspection and to get the kit approved for your car, not needed for export. Because of the new pedestrian safety requirements a lot of tests incl. a crash-test have been made to get the TUEV papers for this body kit. These additional costs are charged with this fee.
 
1 piece

Carbon parts for Audi A8 D4 (4H)

HF 8753-CB
CARBON rear apron with openings for the double tailpipes:
replaces the lower part of the serial rear bumper, with one big opening on the left and right side for the oval double tailpipes HF 8758 or the sports muffler HF 8760. The kit consists of two pieces, the lower diffuser can be removed. This diffuser is made of a cover of real carbon and multiple layers of clear coat.
HPC + CB
1 set
HF 8753-CB
CARBON rear spoiler:
for the trunk / boot. The spoiler is made of a cover of real carbon and multiple layers of clear coat.
HPC + CB
1 piece
HF 8778-CB
CARBON mirror housings:
the serial mirror glas and electrics have to be inserted. Two pieces, one for the left and one for the right side. Made with a cover of real carbon and multiple layers of clear coat.
CB
1 set