Edition for Audi A5 B8 Sportback
 

Model "Chronoswiss Klassik"
Front bumper "R8-Look":

The front bumper „R8-Look“ replaces the serial front bumper of the Audi A5 & S5.
The front bumper is available for cars with or without headlight washer system and
with or without parking sensors (PDC / Parktronic).
For all A5 models the caps HF 8155 are needed, no matter if the car is equipped with a headlight washer system or not.
For the S5 the caps HF 8155 are only needed if the car is not equipped with a headlight washer system.
The bumper cannot be used on cars with distance radar (ACC / Adaptive Cruise Control)!
The original lamella inserts of the Audi R8 have to be inserted into the bumper,
these lamellas have to be ordered separately under the article number HF 8154.
The original front grill of the A5 can be inserted into the front bumper,
additionally available is the “S5” front grill.
The serial fog lights cannot be inserted into the front bumper!

Rear apron "Diffuser":

The rear apron replaces the original rear apron for the A5 / S5 Sportback.
For the Sportback the rear apron is only available with openings for the oval Hofele tailpipes on the left and right side. The rear apron is available for the A5 Sportback with or without S-Line exterior package as well as for the S5 Sportback.

Side skirt attachments + air intake:

Both parts are glued onto the original side skirts of the Audi A5 / S5 Coupé.

On cars with S-Line exterior package and on the S5 only the air intakes are needed. Both articles can be used individually.


Hofele catalogue - browse now!

AAudi A5 / S5

Hofele Designer-Wheels

High-Class Interior

Edition for Audi A5 B8 Sportback
article number
declaration
material
unit
picture
HF 8151
Front bumper "R8-Look"
for cars with or without headlight washer system and without parking sensors (PDC / Parktronic)
HPG
1 piece
Front bumper "R8-Look"
HF 8151-P
Front bumper "R8-Look"
for cars with or without headlight washer system and with parking sensors (PDC / Parktronic)
HPG
1 piece
Front bumper "R8-Look"
HF 8154
Needed for HF 8151 & HF 8151-P:
original "R8" lamella mesh ,
for the left & right side of the front bumper
HPG
1 set
(2 piece)
"R8" lamella mesh
HF 8155
Needed for all A5 models and for the S5 without headlight washer system :
orig. Audi caps for the headlight washers, incl. glue
HPG
1 set
(2 piece)
Audi caps
HF 8156
Needed for all A5 models:
lower engine cover of the Audi S5
Orig.
1 piece
 
HF 8152-S5
"Single-Frame"-Front grill S5, orig. Audi part, incl. license plate holder,
especially prepared for HF 8151
for cars 'without Parktronik'
Orig.
1 piece
Front grill S5
HF 8152-P-S5
"Single-Frame"-Front grill S5, orig. Audi part, incl. license plate holder,
especially prepared for HF 8151
for cars 'with Parktronik'
Orig.
1 piece
Front grill S5
HF 8163-SP
Rear apron "Diffusor"
Version with openings on the left & right side.
For combination with the oval Hofele tailpipes.
Version for the Sportback.
Not for cars with S-Line package!
PKG
1 piece
Rear apron "Diffusor"
HF 8163-SPS
Rear apron "Diffusor"
Version with openings on the left & right side.
For combination with the oval Hofele tailpipes.
Version for the Sportback.
Only for the A5 wit S-Line package and for the S5!
PKG
1 piece
Rear apron "Diffusor"
HF 8164-SPS
Rear apron "Diffuser"
Version with opening only on the left side.
for the combination with the serial tailpipes.
Version for the A5 Sportback with S-Line package.
PKG
1 piece
 
HF 8158-SP
Side skirt attachments + air intake
for Sportback.
PKG
1 set
Side skirts
HF 8162-SP
Air intake for the side skirts
for Sportback.
PKG
1 set
Side skirts
HF 8166
"EVO" sport tailpipes kit,
2 oval tailpipes with a diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised. Not for S5!
Only for A5 with 2 serial single tailpipes, one on the left side and one on the right side! Recomended for the use along with rear apron HF 8163.
E
1 set =
2 piece
"EVO" sport tailpipes kit
HF 8167
"EVO" sport tailpipes kit,
2 oval tailpipes with a diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised.
Only for A5 with one serial single tailpipe on the left side. The tailpipe on the right side is a workless dummy in this case, the special mounting brackets for this dummy are included.
Recomended for the use along with rear apron HF 8163.
E
1 set =
2 piece
"EVO" sport tailpipes kit
HF 8168
"EVO" sport tailpipes kit,
2 oval tailpipes with a diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised.
Only for A5 with one serial double tailpipes left side. The tailpipe on the right side is a workless dummy in this case, the special mounting brackets for this dummy are included.
Recomended for the use along with rear apron HF 8163
E
1 set =
2 piece
"EVO" sport tailpipes kit
back