article
number |
declaration |
mat. |
unit |
AUDI
A4 Cabrio B7 8H + S4 Cabrio B7
(from 2006 - 2008) convertible |
| Body kit "EVO" in RS4-Look & accessories |
| HF 8051 |
front bumper
"EVO" in RS4-Look,
for cars with or without
headlight washer system & without Park Distance
Control (PDC).
Not
for cars with 6 cylinder Diesel engine! |
PKG |
1 set |
HF
8051-P
|
front bumper
"EVO" in RS4-Look,
for cars with or without
headlight washer system & with Park Distance
Control (PDC).
Not
for cars with 6 cylinder Diesel engine! |
PKG |
1 set |
| HF
7456-RS4 |
needed for HF 8051 und HF
8051-P:
"RS4" mesh for the fog lights,
the OEM fog lights can be kept |
OEM |
1 set |
| HF 7262 |
Additional light package for HF 8051 + HF 8051-P:
2x LED day driving lights with 5 LED,
incl. cable set & holders.
The "RS4" mesh has to be cut to make the lights fit! |
|
1 set |
| HF 8054 |
orange reflectors, can be inserted into the sides (left and right above the air
vents) of the front bumpers
HF 8051 & HF 8051-P |
OEM |
1set |
| HF 8055 |
needed for cars without
headlight washer system:
covers
to seal the openings in the front bumper
HF 8051
& HF 8051-P, incl. glue |
OEM |
1 set |
| HF 8056 |
Needed for cars with S-Line Exterieur package & headlight washer system:
One set (two pieces) original Audi lift cylinder
from the headlight washer system. |
orig. |
1 set |
| |
various front grills Typ S4 /
RS4 for font bumper "EVO" |
|
|
| HF 7052-S4 |
"Single-Frame" front
grill "S4"
for HF 8051, incl. license plate holder
for cars without PDC,
OEM part especially
prepared for HF 8051 |
OEM |
1 piece |
| HF
7052-P-S4 |
"Single-Frame" front
grill "S4"
for HF 8051-P, incl. license plate holder
for cars with PDC,
OEM part especially prepared
for HF 8051-P |
OEM |
1 piece |
| HF
7052-RS4 |
"Single-Frame" front
grill "RS4", silver frame
for HF 8051, incl. license plate holder
for cars without PDC,
OEM part especially
prepared for HF 8051 |
OEM |
1 piece |
| HF
7052-P-RS4 |
"Single-Frame" front
grill "RS4", silver
frame
for HF 8051-P, incl. license plate holder
for cars with PDC,
OEM part especially prepared
for HF 8051-P |
OEM |
1 piece |
| HF
7052-RS4 B |
"Single-Frame" front
grill "RS4", black
frame
for HF 8051, incl. license plate holder
for cars without PDC,
OEM part especially
prepared for HF 8051 |
OEM |
1 piece |
| HF
7052-P-RS4 B |
"Single-Frame" front
grill "RS4", black
frame
for HF 8051-P, incl. license plate holder
for cars with PDC,
OEM part especially prepared
for HF 8051-P |
OEM |
1 piece |
| body kit parts in RS4-Look |
| HF 7258 |
side skirts in
RS4-Look |
RIM |
1 set |
| HF 8053 |
rear apron, total width 120cm.
Attention: the
Audi A4 B7 Cabrio / convertible was built with two different rear ends, thats
why you have to measure the OEM rear apron in order to get the correct
Hofele-Design rear apron |
PKG |
1 piece |
| HF 7253 |
rear apron, total width 130cm.
Attention: the
Audi A4 B7 Cabrio / convertible was built with two different rear ends, thats
why you have to measure the OEM rear apron in order to get the correct
Hofele-Design rear apron |
PKG |
1 piece |
| HF
7959-A4 |
bonnet / hood scoop "Power Dome" Fixed by glue
on the bonnet |
PU |
1 piece |
Wide Body in Original RS4-Look
Wide Body Kit B7-Cabrio for original RS4-Design |
HF
8071-P
|
RS4-front bumper, Wide body like
Original.
for cars with or without headlight
washer system &
with Park Distance Control (PDC).
With connection to the wide front fenders
RS4.
Not for cars with 6 cylinder Diesel engine!
In this bumper could
be integrated the original
frontgrill of the RS4 (B7) and
the original
RS4-air intake meshs (left and right side).
The orig. Audi-RS4-fog lamps must
be integrated. |
OEM |
1 set |
| HF
7456-RS4 |
Requested for HF 8071-P:
"RS4 mesh" for the fog lights.
The RS4 OEM fog lights must be bought separately. |
OEM |
1 set |
| HF
8072-RS4 |
Requested for HF 8071-P:
Original RS4-fog lamps, 1 set (2 pieces). |
OEM |
1 set |
| HF 8073-L |
RS4 - Front Fender, left
wide fender with wider inside wheel housing.
With connection only to RS4- side skirts HF 8074. |
OEM |
1 set |
| HF 8073-R |
RS4 - Front Fender, right
wide fender with wider inside wheel housing.
With connection only to RS4- side skirts HF 8074. |
OEM |
1 set |
HF
8074
|
RS4 - side skirts
set for left and right car side
With connection to RS4-front fender HF 8073 and
rear wheel arch extension HF
8075. |
RIM |
1 set |
HF
8075
|
RS4-Look Wheel arch extensions
to set up on the rear side (rear axle) of the A4 Cabrio.
Wide body like Original. Fit by glue.
With connection to RS4-side skirts HF 8074 and
RS4-rear bumper HF 8076. |
PKG |
1 set |
HF
8076
|
RS4 - rear bumper Wide body like Original.
With central, original mesh. |
OEM |
1 set |
| HF 7466 |
"EVO" sport tailpipes
kit,
2 oval tailpipes with diameter of 157 x 92 mm,
tailpipes crocked on
the outside, edges raised.
Not for
S4!
Only for A4 with 2 serial single
tailpipes,
one left side and one right side!
Recomended for use along with rear
apron
HF 7253 + HF 8053 |
E |
1 set =
2 piece |
| HF 7467 |
"EVO" sport tailpipes
kit,
2 oval tailpipes with diameter of 157 x 92 mm,
tailpipes crocked on the outside, edges raised.
Only for A4 with 1 serial single tailpipes left side!
With special fixing bracket for the other side,
where a Dummy
with be fixed.
Right side oval tail pipe is only a Dummy
(no smoke coming
out).
Recomended for use along with rear apron
HF 7253 + HF 8053 |
E |
1 set
=
2 piece |
| HF 8077 |
Spacers kit for RS4-Wide
body
Spacers to bring out the wheels and
fill out
the big wheel arch extensions.
Meassurement and size refer to wheels you use. |
Alu |
1 set
=
4 pieces |
| |
We recommend this wheel
for Wide
Body Kit in RS4-Look:
"SPYDER" Aluminum wheel
- Design similar to
RS4-Look
Dynamic & Sportive
1-part wheel with 8-double spokes and
screw circle around.
Colour: black polished, sizes 9,5J x
19" ET 35, LK 5/112
for tyre size
235/30 R 19
|
Alu |
1 piece |
| exhaust system & tailpipes |
| HF 7466 |
"EVO" sport tailpipes
kit,
2 oval tailpipes with diameter of 157 x 92 mm,
tailpipes crocked on
the outside, edges raised.
Not for
S4!
Only for A4 with 2 serial single
tailpipes,
one left side and one right side!
Recomended for use along with rear
apron
HF 7253 + HF 8053 |
E |
1 set =
2 piece |
| HF 7467 |
"EVO" sport tailpipes
kit,
2 oval tailpipes with diameter of 157 x 92 mm,
tailpipes crocked on the outside, edges raised.
Only for A4 with 1 serial single tailpipes left side!
With special fixing bracket for the other side,
where a Dummy
with be fixed.
Right side oval tail pipe is only a Dummy
(no smoke coming
out).
Recomended for use along with rear apron
HF 7253 + HF 8053 |
E |
1 set
=
2 piece |
| HF
9710204 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8H Cabrio with 2WD & the following engine
versions: 1.6, 2.0, 1.9 TDI, 2.0 TDI & 1.8 T
(gasoline engine with 75, 96, 110, 120, 132 & 140 kW, Diesel engine with
74, 85, 89, 93, 96, 100 & 103 kW) The muffler can be combined with the
Hofele-Design rear apron or the serial rear apron but the serial rear apron
has to be cut to make the tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| HF
97102014 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8H Cabrio with 2WD & the following engine
versions: 2.4, 2.6, 2.7 T, 3.0, 2.5 TDI, 2.7 TDI
& 3.0 TDI (Gasoline engine with 121, 125, 128, 142, 162, 171 & 188
kW, Diesel engine with 110, 114, 120, 132, 140, 150 & 171 kW) The muffler
can be combined with the Hofele-Design rear apron or the serial rear apron
but the serial rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| HF
9710224 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8H Cabrio with 4WD & the following engine
versions: 1.8 T, 2.0 T, 1.9 TDI, (gasoline engine
with 110, 120, 140, 147 & 162 kW, Diesel engine with 96 kW) The muffler
can be combined with the Hofele-Design rear apron or the serial rear apron
but the serial rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| HF
97102214 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8H Cabrio with 4WD & the following engine
versions: 3.0, 3.2, 2.5 TDI, 3.0 TDI (gasoline
engine with 162 & 188 kW, Diesel engine with 132, 150 & 171 kW) The
muffler can be combined with the Hofele-Design rear apron or the serial rear
apron but the serial rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| wheels & chassis |
| HF 9205112 |
"Largo 20" designer
wheel, colour: Brilliance Silver, size: 9J x 20", PCD:
5x112, CH: 57,1, offset 40, TÜV approved for the Audi A4 B6 8H Cabrio
with the tire size 245/30 ZR20 92Y. Wheel spacers have to be used on the
front axle to mount the wheels! |
alloy |
1 piece |
| HF 7474 |
wheel spacers for
LARGO-20 wheels with tires
245/30 ZR 20 at front & rear axle
front axle: 10 mm
rear axle: no spacers required
incl. longer wheel bolts |
alloy |
1 set
=
2 piece |
| |
Largo 20 wheel + tire
Largo 20 with quality tires completely mounted & balanced. |
|
|
| |
"SPYDER" Aluminum
Wheel - Dynamic & Racelook
Design
similar RS4-Look
1-part wheel with 8-double spokes and
screw circle
around.
Colour: black polished, sizes from 8J x 18" to 9,5J x 19"
|
alloy |
1 piece |
| |
"PRADO" Aluminum
wheel - Dynamic & Elegance
choice with or without INOX
stainless steel lip
1-part wheel with 5-double spokes and
screw circle
around.
Colours: silver, black, white, black
polished,
sizes from 8,5J x 18" to 9,5J x 19"
|
alloy |
1 piece |
| HF 29312-1 |
sport springs for
front & rear axle,
lowering of approx. 30mm
for A4 B7 8H Cabrio with 2WD +
4WD / Quattro
1.8 T + 2.4 l + 3.0 l |
St |
1 set
=
4 piece |
| HF 29312-2 |
sport springs for
front & rear axle,
lowering of approx. 30mm
for A4 B7 8H Cabrio + S4 B7 8H Cabrio with
2WD + 4WD / Quattro QB6,
2.5 TDI, incl. S4 Cabrio |
St |
1 set
=
4 piece |
| HF 29310-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A4 B7 8H Cabrio + S4 B7 8H Cabriolet + QB6 with 2WD + 4WD
Lowering of 30 - 70mm at front &
30 - 60mm at rear axle |
|
1 set=
4 piece |
| HF 33358-1 |
Anti-Roll-Bars "Hofele
Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A4 B7 8H Cabrio with 2WD & 4WD
front axle d = 32mm, twofold adjustable,
rear axle d = 20mm, twofold
adjustable |
|
1 set=
4 piece |
| HF 7472 |
wheel spacers for
original wheels
front axle: total 10mm, each spacer 5 mm
thickness
rear axle: total 10mm, each spacer 5 mm thickness
incl. longer wheel bolts |
alloy |
1 set
=
4 piece |
| HF 7476 |
wheel spacers for
original wheels
front axle: total 25mm,
each space 12,5 mm
rear axle: total 25mm, each space
12,5 mm
incl. longer wheel bolts |
alloy |
1 set
=
4 piece |
|
|
|
|
