article
number |
declaration |
mat. |
unit |
AUDI A4 8E B7 + S4 B7 8E
(11.2004 - 12.2007) Limousine + Avant |
| Front bumper "S4 B8-Look" & Accessories |
NEW
HF 8061 |
Front bumper "S4 B8-Look"
for cars with or without headlight washer system and without parking sensors (PDC / Parktronic).
The original front grill of the S4 B7 or RS4 B7 and the original mesh inserts of the S4 B8 can be inserted into this front bumper. The original fog lights can also be inserted into this bumper. |
PKG |
1 set |
NEW
HF 8061-P |
Front bumper "S4 B8-Look"
for cars with or without headlight washer system and with parking sensors (PDC / Parktronic).
The original front grill of the S4 B7 or RS4 B7 and the original mesh inserts of the S4 B8 can be inserted into this front bumper. The original fog lights can also be inserted into this bumper. |
PKG |
1 set |
| HF 8062-C |
Needed for HF 8061 and HF 8061-P:
Original S4 mesh inserts with openings for the fog lights. Version with chrome ring. One set (two pieces) for the left & the right side of the front bumper. The original fog lights of the A4 B7 can be kept. Attention: on cars with intercoolers the right mesh insert has to be manually cut out! |
EOM |
1 set |
| HF 8062-B |
Needed for HF 8061 and HF 8061-P:
Original S4 mesh inserts with openings for the fog lights. Version with black ring. One set (two pieces) for the left & the right side of the front bumper. The original fog lights of the A4 B7 can be kept. Attention: on cars with intercoolers the right mesh insert has to be manually cut out! |
OEM |
1 set |
| HF 8055 |
Needed for cars without headlight washer system:
One set (two pieces) original Audi caps for the headlight washers, incl. glue |
OEM |
1 set |
| HF 8056 |
Needed for cars with S-Line Exterieur package & headlight washer system:
One set (two pieces) original Audi lift cylinder from the headlight washer system. |
OEM |
1 set |
| Front bumper "EVO" & Accessories |
| HF 8051 |
front bumper
"EVO" in RS4-Look, for cars with or without
headlight washer system & without Park Distance Control (PDC).
Not for cars with 6 cylinder Diesel engine! |
PKG |
1 set |
HF
8051-P
|
front bumper
"EVO" in RS4-Look, for cars with or without headlight washer system & with Park
Distance Control (PDC) Not for cars with 6 cylinder
Diesel engine! |
PKG |
1 set |
| HF
7456-RS4 |
needed for HF 8051 und HF
8051-P:
"RS4" mesh for the fog lights, the OEM fog lights can be kept |
OEM |
1 set |
| HF 8054 |
orange reflectors, can be inserted into the sides, left and right above the air
vents, of the front bumpers
HF 8051 & HF 8051-P |
OEM |
1set |
| HF 7262 |
New: Additional light package for HF 8051 + HF 8051-P:2x LED day driving lights with 5 LED, incl. cable set &
holders.
The
"RS4" mesh has to be cut to make the lights fit! |
|
1 set |
| HF 8055 |
needed for cars without
headlight washer system:
covers
to seal the openings in the front bumper
HF 8051
& HF 8051-P, incl. glue |
OEM |
1 set |
| HF 8056 |
Needed for cars with S-Line Exterieur package & headlight washer system:
One set (two pieces) original Audi lift cylinder from the headlight washer system. |
OEM |
1 set |
| |
various front grills Typ S4 /
RS4
for font bumper "EVO" |
|
|
| HF 7052-S4 |
"Single-Frame" front
grill "S4"
for HF 8051, incl. license plate holder
for cars without PDC,
OEM part especially
prepared for HF 8051 |
OEM |
1 piece |
| HF
7052-P-S4 |
"Single-Frame" front
grill "S4"
for HF 8051-P,
incl. license plate holder for cars with PDC,
OEM part especially prepared
for HF 8051-P |
OEM |
1 piece |
| HF
7052-RS4 |
"Single-Frame" front
grill "RS4", silver frame
for HF 8051, incl. license plate holder
for cars without PDC,
OEM part especially
prepared for HF 8051 |
OEM |
1 piece |
| HF
7052-P-RS4 |
"Single-Frame" front
grill "RS4", silver
frame
for HF 8051-P, incl. license plate holder
for cars with PDC,
OEM part especially prepared
for HF 8051-P |
OEM |
1 piece |
| HF
7052-RS4 B |
"Single-Frame" front
grill "RS4", black
frame
for HF 8051, incl. license plate holder
for cars without PDC,
OEM part especially
prepared for HF 8051 |
OEM |
1 piece |
| HF
7052-P-RS4 B |
"Single-Frame" front
grill "RS4", black
frame
for HF 8051-P, incl. license plate holder
for cars with PDC,
OEM part especially prepared
for HF 8051-P |
OEM |
1 piece |
| body kit parts in RS4-Look |
| HF 7458 |
side skirts in
RS4-Look |
RIM |
1 set |
| HF 8057 |
rear spoiler, in 3 parts, only for Limousine /
Sedan,
not for S-Line model |
PKG |
1 piece |
| HF 8053 |
rear apron, in RS4-Look,
recommended for use along with sport tailpipes or sports muffler |
PKG |
1 piece |
| HF 7959-A4 |
bonnet / hood scoop "Power Dome",
fixed with
glue on the bonnet |
PU |
1 piece |
| exhaust sytem & tailpipes |
| HF 7466 |
"EVO" sport tailpipes
kit,
2 oval tailpipes with diameter of 157 x 92 mm,
tailpipes crocked on
the outside, edges raised.
Not for
S4!
Only for A4 with 2 serial single
tailpipes,
one left side and one right side!
Recomended for use along with rear
apron HF 7253 |
E |
1 set =
2 piece |
| HF 7467 |
"EVO" sport tailpipes
kit,
2 oval tailpipes with diameter of 157 x 92 mm,
tailpipes crocked on the outside, edges raised.
Only for A4 with 1 serial single tailpipes left side!
With special fixing bracket for the other side,
where a Dummy
with be fixed.
Right side oval tail pipe is only a Dummy
(no smoke coming
out).
Recomended for use along with rear apron HF 7253 |
E |
1 set
=
2 piece |
| HF 7468 |
"EVO" sport tailpipes
kit,
2 oval tailpipes with diameter of 157 x 92 mm,
tailpipes crocked on the outside, edges raised.
Only for A4 with 1 serial double tailpipes left side!
With special fixing bracket for the other side,
where a Dummy
with be fixed.
Right side oval tail pipe is only a Dummy
(no smoke coming
out).
Recomended for use along with rear apron HF 7253 |
E |
1 set
=
2 piece |
| HF
9710204 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8E with 2WD & the following engine versions: 1.6, 2.0, 1.9 TDI, 2.0 TDI & 1.8 T (gasoline engine with 75,
96, 110, 120, 132 & 140 kW, Diesel engine with 74, 85, 89, 93, 96, 100
& 103 kW) The muffler can be combined with the Hofele-Design rear apron
or the serial rear apron but the serial rear apron has to be cut to make the
tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| HF
97102014 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8E with 2WD & the following engine versions: 2.4, 2.6, 2.7 T, 3.0, 2.5 TDI, 2.7 TDI & 3.0 TDI (Gasoline
engine with 121, 125, 128, 142, 162, 171 & 188 kW, Diesel engine with
110, 114, 120, 132, 140, 150 & 171 kW) The muffler can be combined with
the Hofele-Design rear apron or the serial rear apron but the serial rear
apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| HF
9710224 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8E with 4WD & the following engine versions: 1.8 T, 2.0 T, 1.9 TDI, (gasoline engine with 110, 120, 140, 147
& 162 kW, Diesel engine with 96 kW) The muffler can be combined with the
Hofele-Design rear apron or the serial rear apron but the serial rear apron
has to be cut to make the tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| HF
97102214 |
Duplex sports muffler with one
oval tailpipe per side, oval tailpipes with diameter of 157
x 92 mm, tailpipes crocked on the outside, edges raised, for Audi A4 B7 8E with 4WD & the following engine versions: 3.0, 3.2, 2.5 TDI, 3.0 TDI (gasoline engine with 162 & 188
kW, Diesel engine with 132, 150 & 171 kW) The muffler can be combined
with the Hofele-Design rear apron or the serial rear apron but the serial
rear apron has to be cut to make the tailpipes fit!
TÜV approved by German authorities |
E |
1 piece |
| wheels & chassis |
| HF 9205112 |
"Largo 20" designer
wheel,
colour: Brilliance Silver, size: 9J x 20", PCD:
5x112,
CH: 57,1, offset 40, TÜV approved for the Audi A4 B7 8E with the
tire size 245/30 ZR 20 90Y. Wheel spacers have to be used on the rear axle to
mount the wheels! |
alloy |
1 piece |
| HF 7475 |
wheel spacers for
LARGO-20 wheels
with tires 245/30 ZR 20 at front & rear axle
front axle: no spacers needed
rear axle: 10mm
incl. longer wheel bolts |
alloy |
1 set
=
2 piece |
| |
Largo 20 wheel + tire
Largo 20 with quality tires completely
mounted & balanced. |
|
|
| |
"SPYDER" Aluminum Wheel- Dynamic & Racelook
Design similar RS4-Look
1-part wheel with 8-double spokes and screw circle
around.
Colour: black polished,
sizes from 8J x 18" to 9,5J x 19" |
alloy |
1 piece |
| |
"PRADO" Aluminum wheel- Dynamic & Elegance
choice with or without INOX stainless steel lip 1-part
wheel
with 5-double spokes and screw circle around.
Colours: silver, black, white, black polished,
sizes from 8,5J x 18" to 9,5J x 19" |
alloy |
1 piece |
| HF 29369-1 |
sport springs for
front & rear axle, lowering of approx. 35mm for A4 B7 8E with 2WD
up to
1.050kg front axle weight |
ST |
1 set
=
4 piece |
| HF 29369-2 |
sport springs for
front & rear axle, lowering of approx. 35mm for A4 B7 8E with 2WD
from
1.051kg front axle weight,
incl. A4 DTM Edition 2WD, Typ QB6, 2,0 l Turbo |
ST |
1 set
=
4 piece |
| HF 29368-1 |
sport springs for
front & rear axle, lowering of approx. 45mm for A4 B7 8E with 4WD
up to
1.140kg front axle weight,
incl. A4 DTM Edition 4WD, Typ QB6, 2,0 l Turbo
Quattro |
ST |
1 set
=
4 piece |
| HF 29368-2 |
sport springs for
front & rear axle, lowering of approx. 45mm for A4 B7 8E with 4WD
from
1.141kg front axle weight |
ST |
1 set
=
4 piece |
| HF 29257-1 |
sport springs for
front & rear axle,
lowering of approx. 25 - 30mm for S4 B7 8E |
ST |
1 set
=
4 piece |
| HF
29358-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A4 B7 8E with 2WD up to 1050kg front axle weight.
Lowering of 30 - 70mm at front &
30 - 60mm at rear axle |
|
1 set =
4 piece |
| HF
29358-2 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A4 B7 8E with 2WD from 1051kg front axle weight.
Lowering of 30 - 70mm at front &
30 - 60mm at rear axle |
|
1 set =
4 piece |
| HF
29363-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A4 B7 8E with 4WD up to 1050kg front axle weight.
Lowering of 30 - 70mm at front &
30 - 60mm at rear axle |
|
1 set =
4 piece |
| HF 29363-2 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A4 B7 8E with 4WD from 1051kg front axle weight.
Lowering of 30 - 70mm at front &
30 - 60mm at rear axle |
|
1 set =
4 piece |
| HF
29250-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for S4 B7 8E V8 with 4WD.
Lowering of 30 - 70mm at front &
30 - 60mm at rear axle |
|
1 set =
4 piece |
| HF 33358-1 |
Anti-Roll-Bars "Hofele
Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A4 B7 8E with 2WD & 4WD
front axle d = 32mm, twofold adjustable,
rear axle d = 20mm, twofold
adjustable |
|
1 set =
4 piece |
| HF 33250-1 |
Anti-Roll-Bars "Hofele
Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for S4 B7 8E with 4WD + A4 B6 8E 3,0 L Quattro +
TDI Quattro
front axle d = 32mm, twofold adjustable,
rear axle d = 20mm, twofold
adjustable |
|
1 set =
4 piece |
| HF 7472 |
wheel spacers for
original wheels
front axle: total 10mm, each spacer 5 mm
thickness
rear axle: total 10mm, each spacer 5 mm thickness
incl. longer wheel bolts |
alloy |
1 set
=
4 piece |
| HF 7476 |
wheel spacers for
original wheels
front axle: total 25mm,
each space 12,5 mm
rear axle: total 25mm, each space
12,5 mm
incl. longer wheel bolts |
alloy |
1 set
=
4 piece |
|
|
|
|
