article
number |
declaration |
mat. |
unit |
Facelift model
3-door cars (2005 - 3.2008) and 'SPORTBACK'
(Sept. 2004 - 3.2008)
(Aktuelles A3-Modell und A3 Cabriolet siehe weiter unten) |
| Body kit parts & accessories |
| HF 7071 |
"Single-Frame"- front
bumper, "GT"-Look with big air intakes,
For cars with and without headlamp washer system.
Not for PDC -
Parktronic.
For this bumper will be requested:
HF 7062-S3 "Single-Frame"-front grill S3 |
PKG |
1 piece |
| HF
6061-NL |
Fog lamps set with special frames
specially made for the use in the air intakes of the bumper HF 7071.
1 set with 2 fog lamps. |
|
1 set =
2 pieces |
| HF 7055 |
Will be requested for cars without headlamp washer system:
1 set (2 pieces) orig. Audi covers for the holes of headlamp
washer system, incl. glue. |
Orig. |
1 set |
| HF 7052-S3 |
will be requested for HF 7051-S3
+ HF 7071:
"Single-Frame"-front
grill S3,
orig. Audi part,
including license plate holder
specially adapted for HF 7071 |
Orig. |
1 piece |
| HF 7053 |
Rear apron "Diffusor"
for 4-tube-sport muffler
specially made for Hofele-sport muffler HF 6060 +
HF 6062
Only A3 3-door car, not for Sportback! |
PKG |
1 piece |
| HF 7054 |
Rear apron "Diffusor" for
original tailpipes,
left
up to double tail pipe version left.
Only A3 3-door car, not for Sportback! |
PKG |
1 piece |
| HF 7073 |
Rear apron "Diffusor"
for 4-tube-sport muffler
specially made for Hofele-sport muffler HF 6060 +
HF 6062
Only A3 Sportback, not for 3-door car! |
PKG |
1 piece |
| HF 7057 |
Rear roof spoiler, A3
3-door cars
for all A3 3-door cars, starting
5.2003 until today.
- Not for A3
Sportback - |
ABS |
1 piece |
| HF 7059 |
Rear roof spoiler, A3 Sportback
for all A3 Sportback 5 door
cars, from 9.2004 until today.
- Not for A3 3-door cars - |
PU |
1 piece |
A3 8PA actual model,
3-door car (from 04.2008 - onwards ) and 'SPORTBACK' (from 04.2008 anwards )
Audi A3 Cabriolet (from 02.2008 onwards) |
| HF 7081 |
For A3 3-door car and A3
Sportback:
"Single-Frame"- front bumper, "GTS"-Look with big air intakes,
For cars with and without headlamp washer system.
Not for PDC -
Parktronic.
For this bumper will be requested:
HF 7062-S3 "Single-Frame"- front grill S3 |
PKG |
1 piece |
| HF 7082 |
For A3 Cabriolet:
"Single-Frame"- front bumper, "GTS"-Look with big air intakes,
For cars with and without headlamp washer system.
Not for PDC -
Parktronic.
For this bumper will be requested:
HF 7062-S3 "Single-Frame"- front grill S3 |
PKG |
1 piece |
| HF
6061-NL |
Fog lamps set with special frames
specially made for the use in the air intakes of the bumper HF 7071.
1 set with 2 fog lamps. |
|
1 set =
2 pieces |
| HF 7055 |
Will be requested for cars without headlamp washer system:
1 set (2 pieces) orig. Audi covers for the holes of headlamp
washer system, incl. glue. |
Orig. |
1 set |
| HF 7052-S3 |
will be requested for HF 7051-S3
+ HF 7071:
"Single-Frame"-front
grill S3,
orig. Audi part,
including license plate holder
specially adapted for HF 7081 + 7082 |
Orig. |
1 piece |
| HF 7053 |
Rear apron "Diffusor"
for 4-tube-sport muffler
specially made for Hofele-sport muffler HF 6060 +
HF 6062
Only A3 3-door car, not for Sportback! |
PKG |
1 piece |
| HF 7054 |
Rear apron "Diffusor" for
original tailpipes,
left
up to double tail pipe version left.
Only A3 3-door car, not for Sportback! |
PKG |
1 piece |
| HF 7073 |
Rear apron "Diffusor"
for 4-tube-sport muffler
specially made for Hofele-sport muffler HF 6060 +
HF 6062
Only A3 Sportback, not for 3-door car! |
PKG |
1 piece |
| HF 7057 |
Rear roof spoiler, A3
3-door cars
for all A3 3-door cars, starting
5.2003 until today.
- Not for A3
Sportback - |
ABS |
1 piece |
| HF 7059 |
Rear roof spoiler, A3 Sportback
for all A3 Sportback 5 door
cars, from 9.2004 until today.
- Not for A3 3-door cars - |
PU |
1 piece |
| exhaust system |
| HF 6060 |
4-tube-Sport-muffler in stainless steel, with each side 2 tail pipes, left and right,
tailpipes design Round, different diameter of the tubes 1 x 84 + 1x 90 mm, 1
tube more inside and 1 more outside, round tube edge, Duplex stainless steel
rustfree.
Motor 1.4, 1.6, 1.8, 1.9TDI, 2.0TDI,
(gasoline 55, 66, 75, 85, 110 KW, Diesel 55, 66, 77, 100, 103 KW)
only for Hofele-rear apron HF
7053,
TÜV-homologation.
Only for A3 3-door cars,
not for Sportback! |
E |
1 piece |
| HF 6062 |
4-tube-Sport-muffler in stainless steel, with each side 2 tail pipes, left and
right, tailpipes design Round, different diameter of the tubes 1 x 84 + 1x 90
mm, 1 tube more inside and 1 more outside, round tube edge, Duplex stainless
steel rustfree. 76 mm- tube system ( 3 Zoll! ),
Motor 2.0 FSI Turbo,
only for Hofele-rear apron HF
7053,
TÜV-homologation.
Only for A3 3-door cars,
not for Sportback! |
E |
1 piece |
| HF
6060-Sportback |
4-tube-Sport-muffler in stainless steel, with each side 2 tail pipes, left and right,
tailpipes design Round, different diameter of the tubes 1 x 84 + 1x 90 mm, 1
tube more inside and 1 more outside, round tube edge, Duplex stainless steel
rustfree.
Motor 1.4, 1.6, 1.8, 1.9TDI, 2.0TDI,
(gasoline 55, 66, 75, 85, 110 KW, Diesel 55, 66, 77, 100, 103 KW)
only for Hofele-rear apron HF
7073.
TÜV-homologation.
Only for Sportback! |
E |
1 piece |
| HF
6062-Sportback |
4-tube-Sport-muffler in stainless steel, with each side 2 tail pipes, left and
right, tailpipes design Round, different diameter of the tubes 1 x 84 + 1x 90
mm, 1 tube more inside and 1 more outside, round tube edge, Duplex stainless
steel rustfree. 76 mm- tube system ( 3 Zoll! ),
Motor 2.0 FSI Turbo,
only for Hofele-rear apron HF
7073.
TÜV-homologation.
Only for Sportback! |
E |
1 piece |
| HF
9710304 |
Only for A3 8P with 2
doors:
4-tube stainless steel sports muffler with two round tailpipes per
side. The two tailpipes have a diameter of 1 x 84 + 1x 90
mm, are shifted and have raised edges. The complete muffler is made of
stainless steel.
The muffler is suitable for
the following engine versions: 1.6, 1.8, 1.9 TDI,
2.0, 2.0 TDI,
(gasoline engine with 75, 85, 92 & 110 KW,
diesel engine
with 74, 77, 100 & 103 KW)
The muffler can be combined only with the serial rear bumper,
but
it has to be cut to make the tailpipes fit! |
E |
1 piece |
| HF
9710314 |
Only for A3 8P with 2
doors:
4-tube stainless steel sports muffler with two round tailpipes per
side. The two tailpipes have a diameter of 1 x 84 + 1x 90
mm, are shifted and have raised edges. The complete muffler is made of
stainless steel.
The muffler is suitable for the following engine versions:
76 mm-system (3 inch) 2.0 FSI Turbo
(gasoline engine with 147 KW),
The muffler can be combined only with the serial rear bumper, but
it has to be cut to make the tailpipes fit! |
E |
1 piece |
| HF
9710334 |
Only for A3 8PA Sportback with 4
doors:
4-tube stainless steel sports muffler with two round tailpipes per
side. The two tailpipes have a diameter of 1 x 84 + 1x 90
mm, are shifted and have raised edges. The complete muffler is made of
stainless steel.
The muffler is suitable for
the following engine versions: 1.6, 1.8, 1.9 TDI,
2.0, 2.0 TDI,
(gasoline engine with 75, 85, 92 & 110 KW,
diesel engine
with 74, 77, 100 & 103 KW)
The muffler can be combined only with the serial rear bumper but it
has to be cut to make the tailpipes fit! |
E |
1 piece |
| HF
9710344 |
Only for A3 8PA Sportback with 4
doors:
4-tube stainless steel sports muffler with two round tailpipes per
side. The two tailpipes have a diameter of 1 x 84 + 1x 90
mm, are shifted and have raised edges. The complete muffler is made of
stainless steel.
The muffler is suitable for the following engine versions:
76 mm-system (3 inch) 2.0 FSI Turbo
(gasoline engine with 147 KW),
The muffler can be combined only with the serial rear bumper but it
has to be cut to make the tailpipes fit! |
E |
1 piece |
| wheels & chassis |
| |
"SPYDER" Aluminum
Wheel - Dynamic & Racelook
Design
similar RS4-Look
1-part wheel with 8-double spokes and screw circle
around.
Colour: black polished, sizes from 8J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List" |
alloy |
1 piece |
| |
"PRADO" Aluminum
wheel - Dynamic & Elegance
choice with or without INOX
stainless steel lip
1-part wheel with 5-double spokes and screw circle
around.
Colours: silver, black, white, black
polished,
sizes from 8,5J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List" |
alloy |
1 piece |
| HF 7472 |
wheel spacers for front &
rear axle
front axle: 10mm, each spacer 5 mm thickness
rear
axle: 10mm,
each spacer 5 mm thickness
+ longer wheel bolts |
alloy |
1 set |
| HF 7476 |
wheel spacers for front &
rear axle
front axle: 25mm, each spacer 12,5 mm thickness
rear axle: 25mm, each spacer 12,5 mm
thickness
+ longer wheel bolts |
alloy |
1 set |
| HF 29261-1 |
sport springs for front & rear axle, lowering of approx. 35mm
for A3 8P & 8PA with 2WD up to 1.020kg front axle weight |
ST |
1 set |
| HF 29261-2 |
sport springs for front & rear axle, lowering of approx. 35mm
for A3 8P & 8PA with 2WD from 1.021kg front axle weight |
ST |
1 set |
| HF 29260-1 |
sport springs for front & rear axle, lowering of approx. 45 - 50mm
for A3 8P & 8PA with 2WD |
ST |
1 set |
| HF 29227-1 |
sport springs for front & rear axle, lowering of approx. 35mm
for A3 8P & 8PA with 4WD / Quattro |
ST |
1 set |
| HF 29100-1 |
sport springs for front & rear axle, lowering of approx. 25mm
for S3 8P with 4 WD / Quattro built from 11/2006 |
ST |
1 set |
| HF 29258-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A3 8P & 8PA with 2WD with
front strut clamp d=55mm
Lowering of 40 -
60mm at front & 40 - 60mm at rear axle |
|
1 set |
| HF 29258-2 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A3 8P & 8PA with 2WD with
front strut clamp d=50mm
Lowering of 40 -
60mm at front & 40 - 60mm at rear axle |
|
1 set |
| HF 29225-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A3 8P & 8PA with 2WD with
front strut clamp d=55mm
Lowering of 40 -
80mm at front & 40 - 70mm at rear axle |
|
1 set |
| HF 29225-2 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A3 8P & 8PA with 2WD with
front strut clamp d=50mm
Lowering of 40 -
80mm at front & 40 - 70mm at rear axle |
|
1 set |
| HF
29220-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" - produced by DTM-Racing
supplier for Hofele-Design
for A3 8P & 8PA with 4WD /
Quattro with front strut clamp d=55mm
Lowering
of 40 - 70mm at front & 40 - 60mm at rear axle |
|
1 set |
| HF 29431-1 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" Sport Edition produced by
DTM-Racing supplier for Hofele-Design for A3 4WD / Quattro, incl. 3,2l
& S3 Quattro with stabilizer-holder at the shock-absorber
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle |
|
1 set |
| HF 29431-2 |
Height-adjustable coil-overs
"Hofele-Mono-Tube" Comfort Edition produced by
DTM-Racing supplier for Hofele-Design for A3 4WD / Quattro, incl. 3,2l
& S3 Quattro with stabilizer-holder at the shock-absorber
Lowering of 30 - 70mm at front & 30 - 60mm at rear axle |
|
1 set |
| HF 33258-1 |
Anti-Roll-Bars "Hofele
Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A3 8P & 8PA with 2WD and Xenon lights
front axle d = 26mm, twofold adjustable, rear axle d = 22mm, twofold
adjustable |
|
1 set |
| HF 33258-3 |
Anti-Roll-Bars "Hofele
Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A3 8P & 8PA with 2WD and without Xenon lights
front axle d = 26mm, twofold adjustable, rear axle d = 22mm, twofold
adjustable |
|
1 set |
| HF 33258-2 |
Anti-Roll-Bars "Hofele
Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A3 8P & 8PA with 2WD
front axle d = 28mm, twofold adjustable, rear axle d = 24mm, twofold
adjustable |
|
1 set |
| HF 33220-1 |
Anti-Roll-Bars "Hofele
Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A3 8P & 8PA with 4WD
front axle d = 24mm, twofold adjustable, rear axle d = 26mm, twofold
adjustable |
|
1 set |
|
|
|
|
